|Product||Active Constituent(s):||Registered For:||Overview||Documents
|APVMA Code :63183||500g/L flutriafol||
|For control of certain fungal diseases on wheat, barley and canola when mixed with fertiliser or applied as a foliar spray.
Chemical Group triazole
Ensure that treated fertiliser is dry before sowing with the crop. Sowing: Treated fertiliser should be sown in the same furrow as the seed, not broadcast. Note that the flow rate of fertiliser may be changed after treatment, and the seeder should be calibrated with the treated material to ensure that the correct rates of fertiliser and fungicide are delivered.
Do not mix seed with treated fertiliser.
Check the crop carefully and regularly. Spray only if there is sufficient time in the season for the rust to develop to a level on the variety in question when it will cause significant yield loss.
Fungicide Resistance Warning
Impact Endure In-Furrow and Foliar Fungicide is a member of the DMI group of fungicides. For fungicide resistance management Impact Endure In-Furrow and Foliar Fungicide is a Group 3 fungicide. Some naturally occurring individual fungi resistant to Impact Endure In-Furrow and Foliar Fungicide and other Group 3 fungicides may exist through normal genetic variability in any fungal population. The resistant individuals can eventually dominate the fungi population if these fungicides are used repeatedly. These resistant fungi will not be controlled by Impact Endure In-Furrow and Foliar Fungicide or other Group 3 fungicides, thus resulting in a reduction in efficacy and possible yield loss. Since the occurrence of resistant fungi is difficult to detect prior to use, Ospray Pty Ltd accepts no liability for any losses that may result from the failure of Impact Endure In-Furrow and Foliar Fungicide to control resistant fungi. Resistance should not be assumed without first reviewing the method of application, the coverage and the timing of application.
DO NOT apply by air.
Protection of wildlife, fish, crustaceans and environment
DO NOT contaminate streams, rivers or waterways with the chemical or used containers.
Harmful if inhaled. May irritate the eyes and skin. Repeated exposure may cause allergic disorders. Avoid contact with eyes and skin. Do not inhale vapour or spray mist. When opening the container, mixing and loading or using the product, wear cotton overalls, over normal clothing, buttoned to the neck and wrist, a washable hat and elbow-length chemical resistant gloves and a half facepiece respirator. After each day's use, wash gloves, respirator and if rubber wash with detergent and warm water, and contaminated clothing.
Store in the closed, original container in a cool, well-ventilated area. Do not store for prolonged periods in direct sunlight.
Triple or preferably pressure rinse containers before disposal. Add rinsings to spray tank. Do not dispose of undiluted chemicals on-site. If recycling, replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and bury empty containers in a local authority landfill. If no landfill is available, bury the containers below 500 mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.
Re-Entry (Foliar applications only): Do not allow entry into treated areas for 16 days after application, unless wearing cotton overalls buttoned to the neck and wrist (or equivalent clothing) and chemical resistant gloves. Clothing must be laundered after each day's use.
Product details last updated on 11 Dec 2009
DISCLAIMER: This is not the IMPACT ENDURE label. To view or print the label for this product, click the "MSDS/Label" tab at the top of this page. Always follow label instructions.
For specialist advice in an EMERGENCY only phone 1800 033 111, TOLL-FREE, ALL-HOURS, NATIONWIDE